Roll over or click to zoom in
UPC: 667739210164
Master Carton Qty: 12
| List | $34.99 |
Bore Tech Black Powder Cleaner is a specially formulated, surfactant based cleaner designed for today’s muzzle loaders and inline black powder rifles. The proprietary formulation is a combination of ingredients that can simultaneously cut through heavy layers of powder residue, plastic, bullet lube and corrosive salts that accumulate during shooting.
| • 16 fl oz
• Treated HDPE Plastic • Twist Open/Close Dispensing Cap w/ foam gasket seal • 100% Barrel Safe • Odor Free | • Non-Hazardous
• 100 % Biodegradable • Contains No Ammonia • Short-Term Rust Preventative • Non-Flammable |
Bore Tech Black Powder Cleaner Use Instructions
UNLOAD FIREARM
1.) Wet 3 to 4 Bore Tech X Count patches with Black Powder Cleaner and individually push through the bore to remove loose fouling. Only push patches through the bore in ONE direction.
2.) Next, make 10 to 15 passes with a tight-fitting Bore Tech brush saturated with Black Powder Cleaner.
3.) Then repeat Step 1 and let the Black Powder Cleaner soak for 5 to 10 minutes. For badly fouled rifles, extended soak times may be needed.
4.) Finally, push dry patches through the bore until they come out clean.
5.) Repeat the above steps if necessary.
6.) Dampen a patch with a Black Powder Cleaner before storing the firearm and push through the bore. This will protect against rust/corrosion for up to 2 weeks under normal storage conditions.
7.) For extended storage or in adverse conditions apply Bore Tech Friction Guard XP Gun Oil.
8.) Before using a firearm, always run a dry patch through the bore. This will remove any residue and ensure against obstructions.