Roll over or click to zoom in
UPC: 667739980524
Master Carton Qty: 12
| List | $19.99 |
Bore Tech’s Chameleon Gel™ is a patented, high-tech, color-indicating cleaner and polish that effectively removes severe Carbon, Copper, Lead and Moly fouling. This patented chemical and mechanical cleaning technology is odor free, biodegradable and 100% safe for all barrel types. The easy to use gel formulation requires no mixing and cleans up quickly for a shiny barrel every time. Available in a 2oz tube.
| • 2 fl oz
• HDPE Plastic Squeeze Tube • Integrated Dispensing Tip • 100% Barrel Safe • Odor Free | • Non-Hazardous
• 100 % Biodegradable • Contains No Ammonia • Short-Term Rust Preventative • Non-Flammable |
Bore Tech Chameleon Gel™ Use Instructions
UNLOAD FIREARM
1.) Wet 3 to 4 patches with C4 Carbon Remover or Cu+2 Copper Remover or Eliminator Bore Cleaner and individually push through bore to remove loose fouling.
2.) Next, using the correct caliber Bore Tech Proof-Positive jag and undersized Bore Tech X Count patches or an undersized Bore Tech Proof-Positive Nylon brush with a patch wrapped around it, evenly coat the patch with Chameleon Gel.
3.) Short stroke the bore with the coated patches back and forth in 2 inch increments focusing on problematic areas.
4.) Observe color(s) of the patch to indicate fouling type in barrel
1. Blue/Green = Copper Fouling
2. Black = Carbon Fouling
3. Gray = Lead/Moly
4. White = Clean Bore
5.) Let Chameleon Gel remain in barrel for 3 – 5 minutes.
6.) Repeat above steps as necessary. When the Chameleon Gel remains white in color, bore is clean.
7.) To Remove Chameleon Gel, individually push 2 to 3 wet patches of C4 Carbon Remover, Cu+2 Copper Remover or Eliminator Bore Cleaner through bore.
8.) Finally, push dry patches through the bore until they come out clean.
9.) For storage or in adverse conditions apply Bore Tech Friction Guard XP Gun Oil.
10.) Before using firearm, always run a dry patch through the bore. This will remove any residue and ensure against obstructions.