The Strike Industries has added to its ever growing line of compatible GLOCK™ products with its SI Rear Sight Rail Adapter for the GLOCK™. The SI GSR is a tactical light weight, ultra sturdy, inexpensive solution for shooters wanting to add a rear sight to their Glock but don’t want to have to spend a huge sum of money to have one customized installed. It comes with a rail to mount any sight of your choice, screws to adjust height, and a back plate (Back Plate Locking System) to secure the rail and eliminate any movement from vibration.
COMPATIBILITY:
-GLOCK™ GEN3,4,5 standard frames
-Only OEM GLOCK™ slides
-SI Rear Sight Mount for GLOCK™ Pistol
NOT COMPATIBLE:
-With some non-OEM GLOCK™ aftermarket slides as there is no guarantee accurate rear dovetail size
-GLOCK™ G20,G21,G29,G30,G36,G40,G41
-GLOCK™ MOS slides
In an emergency situation the SI Rear Sight Mount for GLOCK™ Pistol front surface can be utilized for one-hand cocking to speed up readiness.
-(Door way) It works with most solid surfaces...
-(Jeans)...sometimes even the not so obvious places will work.
| List | $54.95 |
The Strike Band for Apple Watch - a blend of sophistication and durability that will elevate your watch's aesthetic with distinctive SI Styling. The band is ingeniously designed with a pin-and-slot fastening system, offering a snug, secure fit, while its concealed strap design seamlessly hides any excess, ensuring a sleek and streamlined appearance.
NOTE: Apple Watch not included
COMPATIBILITY:
For Apple Watch:
-Series 1/2/3 (42mm)
-Series 4/5/6 (44mm)
-SE (44mm)
-Series 7/8/9 (45mm)
-Ultra (49mm)
Package Contents:
-x1 Strike Band for Apple Watch upper band
-x1 Strike Band for Apple Watch lower band
| List | $9.95 |
The Strike Band for Apple Watch - a blend of sophistication and durability that will elevate your watch's aesthetic with distinctive SI Styling. The band is ingeniously designed with a pin-and-slot fastening system, offering a snug, secure fit, while its concealed strap design seamlessly hides any excess, ensuring a sleek and streamlined appearance. Expertly crafted from premium elastomer material, the Strike Band embodies flexibility and durability, guaranteeing to withstand the test of time.
NOTE: Apple Watch not included
COMPATIBILITY:
For Apple Watch:
-Series 1/2/3 (42mm)
-Series 4/5/6 (44mm)
-SE (44mm)
-Series 7/8/9 (45mm)
-Ultra (49mm)
Package Contents:
-x1 Strike Band for Apple Watch upper band
-x1 Strike Band for Apple Watch lower band
| List | $9.95 |
The Strike Band for Apple Watch - a blend of sophistication and durability that will elevate your watch's aesthetic with distinctive SI Styling. The band is ingeniously designed with a pin-and-slot fastening system, offering a snug, secure fit, while its concealed strap design seamlessly hides any excess, ensuring a sleek and streamlined appearance.
NOTE: Apple Watch not included
COMPATIBILITY:
For Apple Watch:
-Series 1/2/3 (42mm)
-Series 4/5/6 (44mm)
-SE (44mm)
-Series 7/8/9 (45mm)
-Ultra (49mm)
| List | $9.95 |
Discover the new Strike Bluetooth Tracker Holder, the perfect solution for attaching AirTags or other trackers to your guns. Compatible with Magpul MIAD®/MOE® pistol grips, it’s ideal for gun owners with multiple firearms. The Holder ensures your tracker stays put inside the grip, freeing up rail space and providing peace of mind during travel or servicing. Upgrade to a Strike Tracker Holder for easy gun tracking. PACKAGE CONTENTS: - x1 Strike AirTag Holder for Magpul pistol grips. - x1 Security set screw - x1 Security set screw tool - x1 Customized Velcro loop with SI logo
Compatibility:
-Fits into any Magpul MOE or MIAD pistol grips
-Holder can take Apple AirTag, Chipolo ONE, and Tile Mate Pro Series(2022)
| List | $15.95 |
Strike Industries’ JellyFish Transparent Red Dot Cover for TRIJICON RMR (Not all models), durable red dot cover for the Trijicon RMR. Its transparent design allows for quick sighting without removal, even in harsh weather. It includes a lanyard hole for attachment and a finger grip for easy removal, combining strength with flexibility for effortless installation. Package includes: • Jelly Fish X1 " Note*: Jellyfish will not fit on Dual-illuminate type models (RM03, RM04, RM05, RM05G, RM08A, RM08G, RMR-C-700064, RMR-C-700065, and RMR-C-700066) "The RMR cover will not properly fit if rear sights are installed. Modification of RMR-JellyFish is required to use rear sights with the RMR cover."
MORE»| List | $14.95 |
Our Link Angled QD mount is compatible with KeyMod and MLOK systems, allowing easy 30-degree installation along the rail. Its angled design prevents interference with other accessories and ensures comfortable sling positioning.
Package Contents:
• x1 Link AQD mount
• x1 Link T-Nut and Allen screw
• x1 blue thread locker packet
• x1 Warning card.
FITMENT NOTES:
• KeyMod slots needed for install: x3
• M-LOK slots needed for install: x1
WARNING:
• Before every use, always check the proper function of your QD mount and any wear and tear from use
• Always have your weapon in the SAFE position when not being fired
• Always follow all firearms safety rules and never point your weapon at anything you are not willing to destroy
| List | $27.95 |
Compatible with both KeyMod and MLOK, our Link Angled QD mount offers a natural push and pull installation/removal alongside the rail at 30 degrees instead of driving the QD socket 90 degrees flat into the rail. Once installed, the Link Angled QD retains an unobtrusive angle while slung to avoid binding with other firearms accessories and support hand while in the firing position.
COMPATIBILITY: M-LOK and KeyMod Rails
DISCLAIMER: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.
Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws
Package Contents:
-x1 Link AQD mount
-x1 Link T-Nut and allen screw
-x1 blue thread locker packet
-x1 Warning card
| List | $29.95 |
Compatible with both KeyMod and MLOK, our Link Angled QD mount offers a natural push and pull installation/removal alongside the rail at 30 degrees instead of driving the QD socket 90 degrees flat into the rail. Once installed, the Link Angled QD retains an unobtrusive angle while slung to avoid binding with other firearms accessories and support hand while in the firing position.
COMPATIBILITY: M-LOK and KeyMod Rails
WARNING:
-Before every use, always check proper function of your QD mount and any wear and tear from use
-Always have your weapon in the SAFE position when not being fired
-Always follow all firearms safety rules and never point your weapon at anything you are not willing to destroy
DISCLAIMER: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.
Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws
National Tactical Officers Association Approved
NTOA Overall Rating: 4.42
Package Contents:
-x1 Link AQD mount
-x1 Link T-Nut and allen screw
-x1 blue thread locker packet
-x1 Warning card
| List | $29.95 |
Strike Industries LINK Attachment System takes the age old question Key-Mod vs. M-Lok and came up with the ultimate solution, a dual interface design compatible with both M-Lok and Key-Mod, same hardware with no need for additional parts. This Aluminum rail section allows the attachment of various M1913 Picatinny spec rail-mounted accessories such as vertical grips, lights, lasers, etc. The Dual interface rail section also features beveled ends to reduce snagging and eliminate sharp corners and edges.
COMPATIBILITY: M-LOK and KeyMod Rails
Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws
Package Contents:
-x1 LINK Rail Section QD - 7 Slots
-x1 Warning card
| List | $29.95 |
The Strike Industries LINK Tripod Adapter utilizes our patented LINK system which allows mounting onto both M-LOK and KeyMod compatible devices. Designed as a cost-effective and intuitive solution geared towards broadening the shooters options relative to supported firing positions. The LINK Tripod Adapter enables easy mounting on almost any tripod plate on the market that uses a standard 1/4"-20 threaded screw. Made of 6061-T6 aluminum with a bead blasted hard anodized finish, this LINK Tripod Adapter will enable you to use any standard camera tripod on your next trip to the range.
COMPATIBILITY: M-LOK and KeyMod Rails
Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws
National Tactical Officers Association Approved
NTOA Overall Rating: 3.81
| List | $27.95 |
Impress the next person who asks to borrow your lighter. The Strike Mag Lighter Cover for BIC® Mini gives you not only a carry and/or storage solution for a BIC® Mini Lighter, but also a fun novelty item for gun lovers. Modeled after the unique Strike Industries pistol magazine design, this SI lighter cover manually extends and retracts with a slide mechanism.
COMPATIBILITY: BIC® Mini Lighter
NOTE:
-Due to tolerances, some BIC® Mini Lighter bodies will require the use of included SI decal for a tighter fitment
-This is an add on item only. If you order this alone, you will be responsible for USPS First Class Shipping**
Package Contents:
-x1 Lighter cover outer sleeve
-x1 Lighter cover inner sleeve
-x1 Lighter cover baseplate
-x4 SI decal for BIC® Mini Lighter body
| List | $8.95 |
The Strike Iron Sights (Suppressor Height) give you an elevated sight picture for a red dot or suppressor pistol setup. The front and rear sights sit at an absolute co-witness position with a slide mounted red dot. Designed to help with proper sight alignment and keep the shooter's eyes focused, there is natural light that is seen on both sides of the front sight between the u-notch rear sight. Steps placed in the rear of both sights help angle and reduce unwanted glares or reflections out of your eyes. Lines and angles designed to use natural light reflections and shadow play to keep user's eye aligned and focused on the target.
FITMENTS:
-Smith & Wesson M&P®, M&P® M2.0™, SD9 VE™, SD40 VE™
NOT COMPATIBLE:
-Smith & Wesson M&P SHIELD™, C.O.R.E. Series, M&P 2.0 Optics Ready
| List | $34.95 |
The Strike Iron Sights (Standard Height) give you the best affordable option so you can throw away those plastic (GLOCK™) or boring OEM steel sights. Designed to help with proper sight alignment and keep the shooter's eyes focused, there is natural light that is seen on both sides of the front sight between the u-notch rear sight. Steps placed in the rear of both sights help angle and reduce unwanted glares or reflections out of your eyes.
DISCLAIMER:
-Recommended maximum torque value for front sight screw is 7 in/lbs.
-Strike Industries wants to provide the best fit possible. Not all slide rear sight dovetails are made equal, especially the many aftermarket options out there. Strike Iron Sights are semi-drop-in and may need to have some light filing to provide the most universal and proper fitment. Please watch the installation video in the MANUAL/VIDEO section of this product page.
FITMENTS:
-Smith & Wesson M&P®, M&P® M2.0™, SD9 VE™, SD40 VE™
NOT COMPATIBLE:
-Smith & Wesson M&P SHIELD™, C.O.R.E. Series, M&P 2.0 Optics Ready
Package Contents:
-x1 Front sight
-x1 Rear sight
-x1 Front sight set screw (for GLOCK™ Standard Frames)
-x1 Rear sight set screw (for GLOCK™ Standard Frames/SIG SAUER P320 Slides with Rear Dovetail/S&W M&P®/Taurus G2/G3)
-x1 Hex key (x2 Hex key for Taurus G2/G3)
-x1 Loctite® Threadlocker Blue 243®
| List | $29.95 |
Take your training on the range to the next level with the integrated lens cover designed to enhance your use of a red dot sight, enabling users to practice Occluded Dot Training. Occluded shooting is a very helpful exercise to help those who may have been taught to shoot with only one eye open to use both instead. This technique (often used by competition shooters) acclimates one's vision when using pistol optics by forcing the non-dominant eye to see your target while the dominant eye sees the dot when the lens is covered. Your brain will merge these two images and provide a clear picture, allowing for faster target acquistion and engagement.
COMPATIBILITY: Trijicon SRO® (all models)
NOTE:
-Optic cover rear sight cut may not clear all rear iron sights and modification to cover maybe required to fit.
-Lens cover is held in place under optic cover. Please remove optic cover to install or remove lens cover.
Package Contents:
-x1 Strike Optic Cover for Trijicon SRO®
-x1 Lens cover
| List | $24.95 |