Bore Tech's Patented Shotgun Patch Jags are a must have for every serious shotgunner. These durable nylon jags make shotgun cleaning a breeze thanks to the 4 flexible petals that grip patches allowing them to perfectly conform to the barrel surface.
Shotgun Patch Jags
Material: Nylon | Threads: 5/16 ? 27
Overall Length ( Including Point ): 2.5 inches |
Shotgun Jag Instructions:
1. Screw the Bore Tech Shotgun Jag onto the cleaning rod.
2. Spike a patch over the spear point attempting to pierce the patch near the center. (See Figure 1).
3. Apply cleaning solvent until patch is saturated.
4. Insert Jag into breach end of the barrel and slowly push through entire length of the barrel.
NOTE: When resistance is encountered near the end of the barrel due to the reduced diameter of a choke, begin rotating the rod in a clockwise direction while applying a slight forward pressure. This allows you to ease the jag through the restricted choke area. (See Figure 2)
5. Next, thoroughly brush the barrel with cleaning solvent to loosen fouling that has adhered to the barrel walls.
6. Finally, using a clean dry patch insert the Shotgun Jag into breach end of the barrel and slowly push through entire length of the barrel. Repeat the process as necessary until patches come out clean.